buy on ebay
download the book for free on the device eledia. Description and acupuncture points for diseases (PDF) 1.6mb
"Eledia” Operation Manual
DEVICE DESCRIPTION
1. On/Off Button – to turn on (up) or off (down) the device. Prevents accidental 9 V battery (Krona) discharge.
2. Microammeter (MA) – for visual current adjustment and control.
3. Current Regulator – to adjust current.
4. "+/-" Button – for diagnostics and additional stimulation of painful point.
5. Treatment Electrode (TE) – to find and treat painful point.
6. Supporting Electrode (SE) – for establishing a closed circuit.
Operation Principle of Eledia device
There are acupuncture points on the human body, the impact on which can provide therapeutic effect. Specific combination of acupuncture points corresponds to each disease. Eledia device allows you to check the points, identify the points where there is an asymmetry of current flow (sick points), and eliminate this asymmetry (treat). Eledia affects points with weak current of negative polarity (-).
Battery Replacement
Unscrew 4 screws at the bottom of the device, remove the bottom cover, replace 9 V battery (Krona).
How to Use the Device
1. Before use, the device must be turned with on/off button.
To make sure that the device is turned on, turn current regulator clockwise to the middle and connect supporting and treatment electrodes (short-circuit them). If the device is on, microammeter needle is deflected to the right.
2. Turn current regulator clockwise to the maximum (full current supply), take supporting electrode in one hand, and treatment electrode – to the other.
3. Determine where should be the point you want to treat. You can find the information on the location of the point in the Atlas of Lednev and at the website. To get started, try some simple point, for example VC9 which is 1-1.5 cm above the navel.
4. Apply treatment electrode to the place where you the point should be.
5. What should happen?
At first nothing, microammeter needle will deflect a little. By moving a little and declining TE in different directions, you should find the point. This will be indicated by the deflection of MA needle to the right, indicating an increase in current capacity. Once you have found the point, you need to wait for the breakdown. The breakdown happens when skin resistance decreases and the current begins to flow to the point. This is expressed by acute painful prick. This means that you have found and opened the point and now can work with it. I note that the points are different – ones can be broken down easily and quickly, others slowly and difficult, one can be broken down at once, the other takes 5 minutes. To speed up the breakdown, turn TE, work with a sharp tip, in extreme case, you can moisten a small area of skin.
6. After the breakdown, it is necessary to reduce the current with the regulator to light tingling sensation (do not endure pain) and immediately check the point for asymmetry.
7. To test for asymmetry: note the value pointed by the needle. Then press +/- button and hold it for not more than 4 seconds. The needle will twitch and starts to deflect to the left to 0 (zero). If the deflection is small and the needle remained essentially in the same place, the point is healthy and may not be treated. If the deflection is high, in indicates the asymmetry and the point needs to be treated. You should check the point for asymmetry immediately after the breakdown within 2-4 seconds before the current stabilizes the point.
8. Treatment of the point comes to elimination of the asymmetry. To do this, keep TE at the point for 1 minute (do not touch or press +/- button). Then press +/- button for 1-2 seconds, check for asymmetry. If it persists, keep TE for one more minute. If the asymmetry is eliminated, proceed to the next point.
9. The point cannot be broken down (no breakdown). Not all points can be broken down immediately. More accurately, almost all points do not break down immediately. And there are the points that are very difficult to break down. If the point cannot reach breakdown, try moving treatment electrode on the area of skin, you may not have got the point and it is close by. To find a point, use microammeter. Watch out for its needle. The principle is simple – if you have found the point, the needle starts to deflect a bit and you need to wait for the breakdown of the point. Try changing the angle of treatment electrode. The electrode is ground to 120 degrees, allowing you to apply it to the point with the sharp end for the breakdown, and with the wide end for treatment. Try and experiment, everybody has different bodies and therefore different behaviors of the points.
10. Read the chapter "How I Treat" from the book.
Website with the description of Eledia device and the points: www.eledia.ru
download the book for free on the device eledia. Description and acupuncture points for diseases (PDF) 1.6mb
"Eledia” Operation Manual
DEVICE DESCRIPTION
1. On/Off Button – to turn on (up) or off (down) the device. Prevents accidental 9 V battery (Krona) discharge.
2. Microammeter (MA) – for visual current adjustment and control.
3. Current Regulator – to adjust current.
4. "+/-" Button – for diagnostics and additional stimulation of painful point.
5. Treatment Electrode (TE) – to find and treat painful point.
6. Supporting Electrode (SE) – for establishing a closed circuit.
Operation Principle of Eledia device
There are acupuncture points on the human body, the impact on which can provide therapeutic effect. Specific combination of acupuncture points corresponds to each disease. Eledia device allows you to check the points, identify the points where there is an asymmetry of current flow (sick points), and eliminate this asymmetry (treat). Eledia affects points with weak current of negative polarity (-).
Battery Replacement
Unscrew 4 screws at the bottom of the device, remove the bottom cover, replace 9 V battery (Krona).
How to Use the Device
1. Before use, the device must be turned with on/off button.
To make sure that the device is turned on, turn current regulator clockwise to the middle and connect supporting and treatment electrodes (short-circuit them). If the device is on, microammeter needle is deflected to the right.
2. Turn current regulator clockwise to the maximum (full current supply), take supporting electrode in one hand, and treatment electrode – to the other.
3. Determine where should be the point you want to treat. You can find the information on the location of the point in the Atlas of Lednev and at the website. To get started, try some simple point, for example VC9 which is 1-1.5 cm above the navel.
4. Apply treatment electrode to the place where you the point should be.
5. What should happen?
At first nothing, microammeter needle will deflect a little. By moving a little and declining TE in different directions, you should find the point. This will be indicated by the deflection of MA needle to the right, indicating an increase in current capacity. Once you have found the point, you need to wait for the breakdown. The breakdown happens when skin resistance decreases and the current begins to flow to the point. This is expressed by acute painful prick. This means that you have found and opened the point and now can work with it. I note that the points are different – ones can be broken down easily and quickly, others slowly and difficult, one can be broken down at once, the other takes 5 minutes. To speed up the breakdown, turn TE, work with a sharp tip, in extreme case, you can moisten a small area of skin.
6. After the breakdown, it is necessary to reduce the current with the regulator to light tingling sensation (do not endure pain) and immediately check the point for asymmetry.
7. To test for asymmetry: note the value pointed by the needle. Then press +/- button and hold it for not more than 4 seconds. The needle will twitch and starts to deflect to the left to 0 (zero). If the deflection is small and the needle remained essentially in the same place, the point is healthy and may not be treated. If the deflection is high, in indicates the asymmetry and the point needs to be treated. You should check the point for asymmetry immediately after the breakdown within 2-4 seconds before the current stabilizes the point.
8. Treatment of the point comes to elimination of the asymmetry. To do this, keep TE at the point for 1 minute (do not touch or press +/- button). Then press +/- button for 1-2 seconds, check for asymmetry. If it persists, keep TE for one more minute. If the asymmetry is eliminated, proceed to the next point.
9. The point cannot be broken down (no breakdown). Not all points can be broken down immediately. More accurately, almost all points do not break down immediately. And there are the points that are very difficult to break down. If the point cannot reach breakdown, try moving treatment electrode on the area of skin, you may not have got the point and it is close by. To find a point, use microammeter. Watch out for its needle. The principle is simple – if you have found the point, the needle starts to deflect a bit and you need to wait for the breakdown of the point. Try changing the angle of treatment electrode. The electrode is ground to 120 degrees, allowing you to apply it to the point with the sharp end for the breakdown, and with the wide end for treatment. Try and experiment, everybody has different bodies and therefore different behaviors of the points.
10. Read the chapter "How I Treat" from the book.
Website with the description of Eledia device and the points: www.eledia.ru